Dec 15, 2009
Arbormorphic
Surface mount LEDs resting delicately on copper wires twined together to create beautiful shimmering LED trees, Arbormorphic - ascribing tree form or attributes to a being or thing not tree.
The trees were inspired from a previous project of Dzl's where he created a much larger version of the tree. We found some Copper wire, first by deconstructing a transformer (pictures coming soon!) and then we finally found our big roll of copper wire and got to work. We pulled a long section of wire across the room, wrapping it around a doorknob at one end of the room and bringing both ends together at the other end of the room, a giant loop. The two loose ends (not on doorknob) were then tied into a screw and using an electric drill we spun it fast and intertwined the two lines of copper.
We then cut the long line of copper into segments, about 30cm long each. We pried apart the two ends of each piece and soldered a surface mount LED on to the end. We tested which sides were positive and negative and then arranged them into a matrix on the protoshield. Below, we describe how and what was done, technically.
Big tree:(White LEDs)
LEDs are connected in a 4X4 matrix on an Arduino shield. These are then connected to 8 pins on the Arduino. The matrix is formed by inserting the LED wires on a proto shield so that the rows and coloumns of the matrix could be run on each side of the board.
Code was quickly written to run through the lights, four at a time and control their individual brightness in 64 levels by multiplexing. A random generator was coded to increase or decrease the brightness of a single random LED. The random generator is run once all the LEDs have been updated.
Little tree: (Green LEDs)
12 LEDs were connected in a charlieplex matrix to control three at once.
The matrix was connected to 4 pins on an ATTINY2313 AVR microcontroller. Code to multiplex the matrix was written to control each LED in 64 steps. The code cycles all LEDs in a sinewave chase with 1/12 phase difference.
Created with Admarket's flickrSLiDR.
Oct 15, 2009
Festival della Creativita - Set up
Our first test run after setting up our exhibition at Festival della Creativita. Everyone looked cool in their shades hooked up with IR gaze detection, and followed their heart beat and GSR streams flowing from one person to another. The festival begins today and its been a hard two days getting this booth in order! We're doing the last touches of tweaking the program and locking everything down (theft is popular in Italy!). We have some great neighbors - check out their video here: http://www.youtube.com/watch?v=EGvwP4QyLcA and another neighbor who is specializing in projecting interactive graffiti! (http://tangibleinteraction.com/)
Oct 8, 2009
Disco Painting
We bought a new projector yesterday, the Optoma ex530 its beautiful!!! Its tiny and has great specs for such a small machine. We had to play with it of course and first watched an episode of Buffy - what better to test on it? Then we tried our installation - both good, though for reference, the Buffy DVDs colors were not the best though they are on our other projector. We'll try with another movie later on.
To the point... we were just setting up to try out projecting on the ceiling to get an idea of what the installation might look like, albeit upside down (its meant for floor projection) so we turned the projector to the ceiling and on the way, caught the eye of our beautiful 20" disco ball. The room exploded in lights and we quickly figured out a new and fantastic past time, disco ball painting.
Opening Paint in windows, Dzl started to draw shapes, colors, and lines on the disco ball, changing the light and reflections it cast around the room, suddenly reflections of circles, squiggles and beautiful colors danced around our ceilings. Guess what our next installation is? Video to follow.
To the point... we were just setting up to try out projecting on the ceiling to get an idea of what the installation might look like, albeit upside down (its meant for floor projection) so we turned the projector to the ceiling and on the way, caught the eye of our beautiful 20" disco ball. The room exploded in lights and we quickly figured out a new and fantastic past time, disco ball painting.
Opening Paint in windows, Dzl started to draw shapes, colors, and lines on the disco ball, changing the light and reflections it cast around the room, suddenly reflections of circles, squiggles and beautiful colors danced around our ceilings. Guess what our next installation is? Video to follow.
Sep 13, 2009
Visiting N7331227 at Brandts!
N7331227, the ABB robot brought back to life with Illutron, has had been living a wonderful life, meeting new people everyday, taking a good look at them, and interacting with people, recognizing the visitor's drawings, and recreating them in light.
The robot uses Computer Vision to see people's drawings, and recreate them by pushing buttons on a wall which light up, corresponding to light bulbs, further down the line. The robot uses its vision to see if the light has been turned on, and if successful, moves on to the next light.
Since the N7331227 is a retired robot, having spend 30 years of its life grinding toilet seats, it might make a mistake now and then, but always corrects itself, and is irresistibly charming.
You can read about some of the beginnings of the reverse engineering of this robot here: http://www.geekphysical.com/2009/02/giving-abb-robot-life-again.html
N7331227 will be living at Brandts art hall in Odense, Denmark until November 29, 2009. (Brandts)
Photos on Flickr: http://www.flickr.com/photos/29889578@N05/3914547979/in/set-72157620216417373/
YouTube:http://www.youtube.com/watch?v=3wgetTevBOg
BlipTV:http://blip.tv/file/2596546
The robot uses Computer Vision to see people's drawings, and recreate them by pushing buttons on a wall which light up, corresponding to light bulbs, further down the line. The robot uses its vision to see if the light has been turned on, and if successful, moves on to the next light.
Since the N7331227 is a retired robot, having spend 30 years of its life grinding toilet seats, it might make a mistake now and then, but always corrects itself, and is irresistibly charming.
You can read about some of the beginnings of the reverse engineering of this robot here: http://www.geekphysical.com/2009/02/giving-abb-robot-life-again.html
N7331227 will be living at Brandts art hall in Odense, Denmark until November 29, 2009. (Brandts)
Photos on Flickr: http://www.flickr.com/photos/29889578@N05/3914547979/in/set-72157620216417373/
YouTube:http://www.youtube.com/watch?v=3wgetTevBOg
BlipTV:http://blip.tv/file/2596546
Sep 3, 2009
BMSI Glove - Galvanic Skin Response and Heart Rate
A hand based sensor system to sense heart rate and galvanic skin response. Part of the biometric social interaction system designed by GeekPhysical.
Read more about it here: http://geekphysicalbiometrics.blogspot.com/2009/09/designing-glove.html
Read more about it here: http://geekphysicalbiometrics.blogspot.com/2009/09/designing-glove.html
Jul 19, 2009
Introducing Biometric Social Interaction
So its not anything new really, we've been exploring it for some time now and hopefully you've seen our post about our biometric jewelery. But now its organized and official, GeekPhysical is exploring Biometrics, specifically what we like to call Biometric Social Interaction, BSI.
We're doing a series of experiments, exploring how people's communication and attitudes change when they are aware of their biometric data and how it changes depending on their interactions with each other.
We think its fascinating that normally people use makeup, clothes, business cards, even cologne to present themselves but they cannot (normally) control their biometrics (heart rate, temperature, skin response, eeg). What if people were judged biometrically? Could be fun, and it is. Check out our newest blog, Biometric Social Interaction, you can also check in through the button at the top of this blog, entitled "Biometrics".
We're doing a series of experiments, exploring how people's communication and attitudes change when they are aware of their biometric data and how it changes depending on their interactions with each other.
We think its fascinating that normally people use makeup, clothes, business cards, even cologne to present themselves but they cannot (normally) control their biometrics (heart rate, temperature, skin response, eeg). What if people were judged biometrically? Could be fun, and it is. Check out our newest blog, Biometric Social Interaction, you can also check in through the button at the top of this blog, entitled "Biometrics".
Jul 2, 2009
Ball of Jeans!
A huge ball of jeans, filling up the amazing Copenhagen Central Station, attracts tons of people for the release of 1500 pairs of ONLY jeans. Dzl of GeekPhysical, Zep and friends built the ball. More details to come! Photos below and on Flickr, video below and on Blip.
Photos: http://www.flickr.com/photos/29889578@N05/sets/72157620734553641/
Video: http://blip.tv/file/2313739/
Created with Admarket's flickrSLiDR.
Photos: http://www.flickr.com/photos/29889578@N05/sets/72157620734553641/
Video: http://blip.tv/file/2313739/
Created with Admarket's flickrSLiDR.
Subscribe to:
Posts (Atom)